We're short staffed from Saturday, Sept 21 through Thursday, Oct 10, so assembled items will take longer than indicated and answers to questions may be delayed. Thank you for your patience.
A12B Microphone Preamp
The A12b is a simple, single stage preamp roughly based on classic American designs of the early '70s. Built with the suggested transformers and op-amp, the result is an amplifier with an aggressive midrange and pronounced transformer coloration. The A12b sounds fantastic with rock drums and electric guitars, but is versatile enough to be used with a wide variety of source material and microphone combinations. Available as an assembled module only.
CH02-SP-A12 subpanel must be ordered separately.
The A12b can provide 70dB of gain, including the voltage step-up provided by the transformers. This is more than enough gain for most applications, especially with modern high-output condenser microphones.
A 12 position Grayhill switch provides accurate and repeatable gain settings in 5dB steps from 15dB to 70dB.
Since 5dB is often too big a gain step, the A12b also has a gain trim control, which provides up to 6dB of cut at any gain setting. This allows very fine adjustment of gain between steps.
Inverts the signal phase.
Slow-rise phantom power minimizes pops and thumps.
High quality PC mount connectors eliminate cabling and ease assembly.
The A12b uses a CineMag CMMI-8-PCA to couple the microphone signal to the amplifier. Manufactured to exacting standards, this transformer gives an 18 dB voltage step-up, has excellent specifications, and provides distinctive sonic qualities that compare very favorably to vintage units.
The steel-core CMOQ-2S gives the A12b an aggressive character virtually indistinguishable from certain vintage amplifiers.
On-board voltage regulators can accommodate power supplies from +/-27VDC up to +/-35VDC. Local regulators keep inter-channel crosstalk extremely low when multiple preamps share the same power supply.
The A12b has a high-performance discrete op-amp laid out directly on the main circuit board. The circuit is exactly the same as our very popular SC25 amplifier module.